Engine sputters on occasion
SOURCE: 1997 Jeep wrangler
Clock spring mech is prob bad, first easy check is remove airbag 2 8mm bolt from back side of wheel make sure wires are still connected if they are good the clock spring mech is bad you can use a steering wheel puller to remove wheel and clock spring mech just snaps out and has 2 plugs on it, I have 2 if you need one.
SOURCE: Jeep wrangler Fuse box
You have two locations for the fuse box. One is either under the hood or behind the glove box. I would pull apart the glove box and take a look.
SOURCE: jeep wrangler bucking
how long has this been happing..one tank of fuel or more, could have been bad gas, replace filter,, put gas dryier in fuel tank..if it continues could possibly be transmission related..the reving down doesn't sound like transmission though if tansmission was slipping it would rev up..good luck
SOURCE: Hard starting when cold ( engine cranks normally )
see if your engine has a ECT sensor (temp sensor that delivers information to your ECM) they are installed on the intake side of the cylinder head, it usually has 2 cables, have it checked replace if necesary
SOURCE: how do i replace serpentine belt on 1997 jeep wrangler
Adjustment is made by loosening the power steering pump. There is a transverse long bolt (jack bolt) right under the pump that is used for adjustment.
186 views
Usually answered in minutes!
×