Torque schedule and specs. EX. manifold only
SOURCE: Intake leak
try this website to see if the have your truck listed its www.alldatadiy.com if they do you be able to get pictures and diagrams showing you how to repair you truck another one is www.autozone.com i also woul like to give you this information if you ever have any hard to find GM-parts they sells only GM-parts its Schram auto & truck parts 1-800-292-1032 and they website is www.schramauto.com i hope i have been some help to you Michigan Man.
SOURCE: i need the engine torque specs for 99 chevy malibu
99 chevy malibu v6 3.1 engine, head bolt torque is-- 98 through 2001 is step1- 37 foot lbs, step 2- rotate an additional 90 degrees (1/4 turn). the rocker arm bolts are 168-in. lbs.
SOURCE: intake manifold torque specs and
Fig. Exploded view of the upper and lower intake manifold and fasteners
- Position the rocker arms in their original locations and tighten to the proper specifications.
- Install lower the intake manifold attaching bolts. Apply sealant
or equivalent thread locking compound to the threads of bolts. Tighten
the vertical bolts first, then the diagonal bolts to 115 inch lbs. (13
Nm).
- Install the upper intake manifold and tighten the mounting bolts to 18 ft. lbs. (25 Nm).
Hope helps (remember to rate this).
SOURCE: 02 Chevy avalanche 1500 need
1st pass 44 inch lbs
2nd pass 71 inch lbs, check the manifold joints for shifting and fix if needed
3rd pass 106 inch lbs
4th pass 11 ft-lbs
Start in the center and tighten in a criss-cross pattern.
619 views
Usually answered in minutes!
×