At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
You can take loose the black plastic shield that runs from inner fender to bottom of bumper. once loose you gain access to back of fog light where mounting bolts are located if its just the bulb your replacing you can also do that without removing it
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Curves in the road are a common occurrence and cars are easily equipped to go around them.
The wire could be off a number of things, but you can test by turning all the lights on, especially the low level fog lights. Also try the horn, as if I remember correctly it is located above the passenger wheel arch liner.
The plastic bracket that holds it in has either a 10mm or 8mm holding onto underneath but if you need to replace bulb you dont have to remove the entire assembly
To replace the fog light of the passenger side you need to remove the fog light bolt and pull out the fog light assembly, then you can remove the bulb and put a new one in.
To replace the fog light on the driver side you will need to remove the front bumper cover so you can remove the vacuum box that is in the the way of the fog light bolt.
To do so you need to remove the Torx (star) screws located in the front wheel wells as well as the bolts holding the plastic by the radiator. "CAUTION: DO NOT UNBOLT THE RADIATOR."
If any of the screws are rusted into place put some penetrating oil them to help loosen them up.
if you look directly under the bumper just under the fog light you will see a bracket that holds a 13 mm bolt. undo that and pop the light out from the front of the bumper and replace the bulb. install is the reverse
×