94 TAURUS 3.8 FIRING ORDER - 1994 Ford Taurus

94 chevy 4 3 v6 firing order Google Search Requesting the Firing Order of 4 3 Liter V6 1 6 5 4 3 2

if its a 3.0 with vin# 1,2 or u the firing order is 1-4-2-5-3-6

if its a 3.4 with vin# n the firing order is 1-5-4-2-6-3-7-8

hope this helps, good luck!

1-4-2-5-3-6

FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: 1991-94 2.9L and 3.0L Engines Firing order: 1-4-2-5-3-6 Distributor rotation: Clockwise
Fig. 2: 2.3L, 2.5L Engines Firing order: 1-3-4-2 Distributorless ignition
Fig. 3: 1995-99 3.0L Engines Firing order: 1-4-2-5-3-6 Distributorless ignition
Fig. 4: 4.0L Engines Firing order: 1-4-2-5-3-6 Distributorless ignition
Fig. 5: 1996-99 5.0L Engines Firing order: 1-3-7-2-6-5-4-8 Distributorless ignition

For the 1987 Ford Taurus 3.0L V6:

Firing Order:
1 - 4 - 2 - 5 - 3 - 6

Cylinders:
.......(back)......
|...1....2....3...|
......................
|...4....5....6...|
.......(front)

Distributor:
.....(back)
........(+)-screw
.....3.......6
5................1
.....2.......4
........(+)-screw
.....(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact us at FixYa.com!

For the 1994 VW Golf:
I do not know if you have the 1.8L SOHC In-Line 4-Cylinder or the 2.0L SOHC In-Line 4-Cylinder; however I have included both below:

For the 1.8L SOHC In-Line 4-Cylinder
Firing Order:
1-3-4-2
Cylinders:
..........(back).........
|...1....2....3....4...|
..........(front)
Distributor:
...(back)
(+)....1
...2.........3
........4...(+)-screw

For the 2.0L SOHC In-Line 4-Cylinder:
Firing Order:
1-3-4-2
Cylinders:
..........(back)..........
|...1....2....3....4...|
.........(front)
Distributor:
......(back)
.....2.......1
(+)............(+)-screws
.....4.......3
......(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Firing order is 1-4-2-5-3-6
You should have a number one stamped on the number one position of the distributor cap.
The cylinders are numbered as follows:
facing your car,
from left to right rear bank 1-2-3
front bank 4-5-6
The one in the middle goes to the coil.
The distributor has 2 mounting that hold it in position. - starting at the back screw to the right going clockwise is 3-5-2-4-1-6. This is the numbering on the distributor if you dont have a number one stamped.
Hope you get it going and tell mom to label the wires nest time!

1-4-2-5-3-6

Sir,
There are two firing order sequences for the FORD V-6. It depends on which engine you have. The first is 1-4-2-5-3-6. The second is 
1-4-2-3-5-6. The in-line six cylinder engines use: 1-5-3-6-2-4. You should look at the intake manifold to see which firing order your car uses. The firing order is normally stamped or embossed on the top of the intake manifold.

Link 1
Thanks Good Luck
Appreciate to rate as "Fixya"

Hi..
Your 00 taurus 24v,
Use a Direct ignition, It's mean COIL on PLUG.
Each cylinder use one coil.
The firing order is ; 1-2-3-4-5-6..
The cylinder 1-2-3 are located at the FIREWALL side, starting from the Belt Side..
4-5-6 are Located at the Radiator side, starting from the belt .