Where is the kill switch ? - 1996 Dodge Ram 1500 Club Cab

Dont think ther is any. Whats the goal. U got the ignition switch..relays etc

replace the key switch as it is faulty
as to fitting a kill switch find a switch that the mount opens up so that the switch can be mounted without the necessity to remove anything off the handle bars take a wire from the key switch and run it to the kill switch and from the other terminal reconnect it to where it came from. This means that the power from the ignition switch now goes to the kill switch then back to where it was originally connected after the igition switch.

No kill switch

the kill what, you left off the noun?
the engine, or kill the rap from the radio.
engine, turn the key to off

The only "kill" switch they have is the ignition switch.

A remote kill switch would be a switch that a mechanic installed, for an owner to prevent theft. It is a "poor mans alarm". If you know that it has a kill switch then you are there. You need to either hire a mechanic to find out what circuit the "kill switch" is integrated into and have it removed or do it yourself. But if you are referring to the "On-board" security system, I need to know exactly what you are working on. (Year, make, model, engine size)

kill what? weeds?
kill engine is ignition switch off?
kill sound is radio mute.
?>??????

No such thing as a kill switch.
Ford products have an inertia switch to cut off power to the fuel pump.

are you refering to an auto start? if you want to install a kill switch all you have to do is go to your stearing collum, of course your going to take the pannles off, find the big red wire thats main ignition to the switch cut and splice a toggle or a axilary key switch in line that will allw you to kill power to the ignition sutting down the rig hope it was helpfull but still need more info on what your asking

This all depends on what kind of kill switch, most kill switches operate by cutting a wire and running it through a switch, so locate the switch and remove the wires and connect them together, there should be a wire on each end of the switch, like a light switch, the switch connects them or disconnects them, so you will connect them,