Timing marks
SOURCE: raio
do you have navigation? mine has navigation and im not sure if this is the reason why they did this but, when i got my battery replaced, like 2 months ago, they had to connect the battery line to something else other than the battery before taking the battery out or else it resets everything on the car and you have to take it to a dealership for a 300 dollar job... where did u get the battery replaced?
i would just take it to a dealer, and find the problem first...
and then if it is something thats pretty simple, just look online for the part or getting it fixed...
good luck!
SOURCE: How do I reset the oil life indicator on my Acura
To reset MAINTENANCE REQUIRED light, turn ignition off, press and hold the SELECT and RESET buttons. Turn ignition on and hold buttons for 10 seconds until indicator resets.
SOURCE: headlights adjustment on 2006 acura tsx
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
support.
If you have one adjustment screw, it will control your vertical aim.
If you have two adjustment screws, one will control your vertical aim
and the other will control your horizontal aim
Park
your car on a level ground 30 feet from a wall and measure the height
from the ground to the bulb and mark on a wall (do this for highs beams
and low beams if the bulbs are separate, if highs and lows are the same
bulb, only do it for the lows)
If the headlights read VOR, then
aim the brightest part or cutoff part just below the mark on the wall.
If it says VOL or nothing, aim them 2 inches below the mark on the wall.
74 views
Usually answered in minutes!
×