SOURCE: driver side seat 03 ENVOY
the motor make sound disconnect the the cable that goes to the seat if they move you got something blocking the mouvement of the seat check that out pierre
SOURCE: Front driver seat adjustments.
I just had this problem fixed with a Tech 2 tool in my '03 yukon xl denali. The seat has a control module underneath of it that controls the 2-position memory, the power seat functions, etc. It needed to be reprogrammed - about $200 at the dealership, or free if you 1) have a good relationship with your service manager, or 2) own or know someone with a Tech 2 tool.
At first I thought it was because I had a Canadian model truck (the headlight switch is stuck "on" at all times no matter what position it's in, and the rear air controls are in celcius and not farenheight).
I'm assuming the switch worked before, and you may have encountered some sort of electrical issue (like a dead battery, or you gave someone a jump, you have a bad ground, you just installed an aftermarket stereo, you used a computer tuner, etc.).
Hope this helps!
SOURCE: seat will not move forward or backward...
if motor seemed to slowly get worse over time then there is a great chance that the motor is gone. You will have to unplug the motor and test for power at the motors connector. if the power is good when switch is activated then the motor is dead, but if no power is found then you either have a bad switch or connector or a wiring harness problem. It will not be the fuses since the driver and passenger seats are the same. also one more thing to check is if your vehicle has memory seats then if no power is found at motor, this memory module mounted to seat could be the problem..
SOURCE: polarity reversed on power seats
It shouldn't be possible to invert connector plug but what ever you did prior to this situtation is suspect ! Try reversing the plug wiring , It's designed to turn in both directions and will not damage the motor ie back / forward. Good Luck
SOURCE: when i move the driver
Hi.
Its most likely the motor connector plug is reversed polarity. If you have been repairing of have at any stage done a recent past perfomed any modification or adjustments to the seat wiring . You should revisit your repair ! Hope this helps Good Luck
41 views
Usually answered in minutes!
×