Will 1992 2.5 fit 2000 2.2 transmisison - 2001 Chevrolet Blazer

no car or truck told
makers name, model, year, and engine name,
and if super savvy , the country.
sorry cars are not all the same ever.
some cars sold with 20 + engines, (land cruiser)
amazing no?
the vin on the car can be decoded, try that. online.
then tell what you own.
3s-fe is toyota. and is Fuel injected EFI of some kind ,vast
wiki says
1987 to 2000 only
Celica GT (US), Celica ZR (Japan, ST162)????

and states this (FSE is not the same so ....)to 2003.
The Toyota 3S-FE is a 16-valve 2.0 L twin camshaft, single cam gear engine built by Toyota from 1986 to 2000. European version produces 128 PS (94 kW; 126 hp) at 5,600 rpm and 179 Nm (132 ft-lb) at 4,400 rpm without a catalytic converter; with, maximum power is 121 PS (89 kW; 119 hp).[11] It is commonly used in the Camry 1987-1992 model, the Celica T160/T180/T200, Carina 1987-1992, Carina 1988-2001, Caldina 1992-2002, Carina ED 1985-1998 and Carina E 1993-1998 models, Corona T170/T190 as well as Avensis 1997-2000 models and RAV4, 1994-2000, Picnic/Ipsum 1996-2002 and Comfort 2001-2007. The 3S-FE was also used in some MR2 Mk2 cars due to its torque band being suitable for the automatic models. The 3S-FE is fitted with EFI. The 3S-FE engine is fitted with a cast iron crankshaft, whereas the 3S-GE/GELU engines have forged crankshafts.[10]

totally different because 2000 has sensors not compatible with a 1992

At www.reliable-store.com get complete guide on whether to repair or not, service it, and how to repair etc, along with wiring diagrams, electrical diagrams, torque specs,
error codes, everything.

cross over year models
might be cosmetic changes
you would have to check the yersa suspensions parts listing

• Seventh generation (1992-1999)
• Eighth generation (2000-2005)

http://www.wholesalegmpartsonline.com/cars/buick/0/lesabre/accessories---body/lesabre-parts.html

Low of fluid, or bad transmisison. If not low on fluid, replace or have transmision rebuilt.

No.

sounds like you have bad TCM......

you should not need a diagram. most gasket kits have the correct torque and order of torque for your fitting procedures. if unsure, put everything of in a line, then reverse to put it on . cheers goodluck

No, it will not work, the 1992 motor is for OBD I and your car has OBD II.

hi, mercedes are good for 200,000 before you change transmission oil, hope this helps my E300 has done 350,000 and still changes fine as the oil is not a lubricant as such it lasts longer and does not lose it's viscosity, hope this helps you, thanks for useing fixya