SOURCE: where is the o2 sensor located on a 1991 honda accord ex 2.2 engine
Further clarification on the O2 sensor location: It is in the exhaust pipe, under the center of the car, on top of the pipe, just aft of the oil filter.
SOURCE: where is throttle position sensor located on 2000 honda passport
Normally attached at opposite end of throttle linkage. Remove your air cleaner intake hose at throttle body, and observe throttle plate that opens & closes as you press accelerator, it will be at the end of that, on outside of housing.
SOURCE: oxygen sensor replacement
you need to rent an 02 sensor socket and use a ratchet and the socket to remove it, there are two on the exhaust pipe one before the cat, you can see it on the exhaust pipe and one after. normally the 1at one goes out. cost $75.00 please rate if helpful.
Testimonial: "it was very helpful! thanks"
SOURCE: location of a pcv valve on a 2005 honda accord
The general location mentioned is correct. However, unlike most PCV valves there is no hose connection to the valve. There is a single bolt that attachs the PCV valve to the valve cover. Loosen the bolt, then remove the PCV valve from the valve cover. It is inserted inside the valve cover. Very different from most PCV valves as far as attachment method to the valve cover.
SOURCE: where are the 2 oxgyn sensors located
There's one located directly after your catalytic converter and the other one is located before your catalytic converter (somewhere between your headers and that cat)
Testimonial: "There are actually 2 sensors. One on the engine manifold and the second is on the atalitic (sp) converter. "
240 views
Usually answered in minutes!
×