SOURCE: ignition switch in a 1995 ford taurus
Ignition Lock Cylinder
Ford Taurus/Sable 1986-1995 Repair Information
REMOVAL & INSTALLATION
Functional Lock
The
following procedure applies to vehicles that have functional lock
cylinders. Such cylinders either have a key available or known key
numbers from which a key can be made.
Using the key, turn the ignition lock cylinder to the RUN position,
then depress the retaining pin using a wire pin or small drift
To install:
Non-Functional Lock
The
following procedure applies to vehicles in which the ignition lock is
inoperative and the lock cylinder cannot be rotated due to a lost or
broken key, unknown key number or a lock cylinder cap that has been
damaged and/or broken to the extent that the lock cylinder cannot be
rotated.
SOURCE: Fusible Link
never change a link or fuse with a larger one. It is there to protect the remainder of the system. You need to find out what is wrong and fis that probem.
SOURCE: where is the a/c low side service port for 1995 Ford Taurus
Locaed on the bulkhead on the passangers side. A plastic shield runs along the top of the bulkhead hald by three plastic clips and screws. remove this and you will see the connector port.
SOURCE: Need to knwo the location of the fusible link on a
http://www.motorcraftservice.com/pubs/content/~WOYEXD/~MUS~LEN/41/00exdog1e.pdf
There you go - goto the index of this PDF, find fuses p160 or something, theres a picture of the "distribution Box" right hand side of engine about 1/3 way back - thats where the links are.
Thumbs up please!!! Thanks.
265 views
Usually answered in minutes!
×