Question about 2007 Hyundai Getz 1.4
The stereo will turn on, you can change the radio station, adjust the volume and switch mode to AUX, but not one sound comes out of the stereo. I have tried turning it on and off but nothing has changed.
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
it does sound like a fuse problem. make sure the fuse you replaced did not blow again. the radio will have two fuses for it , one ignition fuse to make it work and a permanaent supply fuse to keep the memory when you turn the car off. i would check all the fuses, even tho they look good they could still be blown. best way to check them is to turn the ignition on and with a 12 volt tester go across both sides of the fuse, the tester should work across both sides, if it only works one side it heas blown. just a thought in regards to the battery change make sure all the cables have been put on correctly, none left or on wrong side. hope this helps.
Posted on Apr 16, 2009
After verifying all the connections to the radio are good (power and ground, antenna, speakers, etc), the audio unit has an internal malfunction. Solution: Replace the audio unit.
Posted on Jun 28, 2009
doubtful probably burnt up a component in radio thats why when jumping a vehicle u turn off all accessories so when something gets crossed it doesnt short it out usually will blow a couple of fuses
Posted on Feb 10, 2010
SOURCE: Code P0133-02 (o2 sensor slow
just because you have a slow response code does not mean that you have a bad sensor, the slow response code is just telling you that the fuel system is very slow to respond to fuel delivery changes, this could be caused by many different things it could be as simple as the oil is contaminated with fuel, it could also be a problem with the fuel pressure, could also be a vacuum leak. the fact that you keep getting the same code with different sensors tells me that the problem is not the sensor but the fuel injection system. there is a flow chart for the fuel system and i am afraid you are going to have to have someone run a diag. check on the fuel system.....SORRY
Posted on Jan 13, 2011
SOURCE: car doesnt want to start.
The starting system consists of:
Possible sources of the problem if the engine does not crank or the relay clicks:
I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514
Posted on Mar 16, 2011
Tips for a great answer:
Feb 03, 2015 | Cars & Trucks
Jan 20, 2015 | Cars & Trucks
Nov 11, 2013 | Cars & Trucks
Oct 15, 2017 | 1997 Ford Crown Victoria
Jan 28, 2013 | Mercedes-Benz C230 Cars & Trucks
Jul 25, 2017 | 2009 Acura TSX
Oct 08, 2010 | 2007 Mercedes-Benz S550 Sedan
Jun 17, 2009 | 1993 Toyota Previa
296 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: