Bout it used was told it needed a fuel pump so.... new pump new ign.moduel got fire fuel it tries to start but.... u no
Hello
u will find a lot of wiring diagrams and circuit diagrams help books and stuff like this at reliable-store
the girl in the chat box can help u instantly... im a frequent buyer there since Im a mechanic so take help from there
Your question is realy garbled but I think you are asking about the timing of the cam and the crank sensors usually you have to have them both replaced at same time which means you can see the NO1 position on the cam and the position of the crank and thats with the cover off but I found out from another friend that if you go onto YouTube and request How To set timing on the Cam shaft and Crank shaft sensors you will get a video. MAKE SURE YOU SPELL IT ALL RIGHT OTHERWISE YOU WILL NOT FIND IT. Sorry about the Caps but wanted your attention use my spelling. Good Luck
SOURCE: shuts off while driving. no fuel pressure. pcm fuse blows/ fuel pump relay inserted.
Sounds like the fuel pump is shorted.
SOURCE: My 1995 GMC jimmy 4x4 just stopped running.
Had same problem. replaced spark plugs and egr vavle. Runs like a top and was cheaper than fuel pump and filter.
SOURCE: I have a 1997 Gmc Sierra 5.7 4x4. It has no spark.
It could be the CPS, but as you now know throwing parts at a repair is costly and sometimes it does not fix anything. A code scanner should be able to tell you if the sensor is bad. If the CPS goes bad you will have no spark.
SOURCE: 2006 gmc sierra 1500 stalled and will not start.
i have a 06 sierra that done the same thing and it was the distributer gear stripped
174 views
Usually answered in minutes!
On the 97 vortex motor the timing is done electronically it is called a cam retard which is I believe like to be set between plus 2 to negative 2 to set plug your computer into your obd2 port engine idle is like 1500 rpm and you will twist distributor till you get the correct reading. There in no other timing on this motor except the timing chain and it is only set 1 way by the marks there is no adjustment there.
×