- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Blinking engine light means if you drive it you may cause damage to the engine or the emissions system.. Get a code reader from a parts store and see what the codes are.
It needs to have a diagnostic tool hooked up and fult Codes read after this the technicians can fix fult and clear code this will turn light off
codes are logged when a problem occurs within the engine management system this turns the warning light on.
Light on means codes are stored. There are well over 800 possible codes so guessing is a waste of time. Overheating could be caused by a radiator fan issue. But keep driving it like that and you'll soon be looking a a MAJOR repair for blown head gaskets. Overheating is #1 cause of gasket problems.
Hi the p1684 means the battery has been disconnected within the last 50 starts, the P0135 is Oxygen O2 Sensor Heater Circuit Malfunction (Bank1, Sensor1), you may have notived an increase in fuel consumption. and the P0456 code means evaporated emissions system -small leak detected the causes could be either A small leak in any of the EVAP hoses or fuel tank hoses, a small leak in the purge valve or vent valve or the EVAP Canister may be leaking Hope this helps Steve
It means there is a transmission electrical problem. There should be a transmission trouble code stored that will point you in the right direction.This will not always turn on the check engine light.
×