Diagram for serpentine belt on 93 dodge caravan

there should be a diagram under the hood by the radiator

there should be one on the van itself somewhere under the hood

For the 1991 DODGE DYNASTY - V6 3.3L 201ci GAS FI N R , review this informacion:

Belt Routing Diagram
- Multiple Accessory, w/o A.C. (Mfg. After 2/27/91)
- Multiple Accessory, w/A.C. (Mfg. After 2/27/91)
- Multiple Accessory, w/o A.C. (Mfg. Before 2/27/91)
- Multiple Accessory, w/A.C. (Mfg. Before 2/27/91)



Remove the serpentine belt by using a breakover bar, rachet or serpentine belt removal tool with the correct size socket for the pulley mounting bolt. Rotate tensioner arm to release tension. Remove the belt.

Hope helped with this (remember rated this help) Good luck.

there should be a diagram directly on the core support under the hood or some manufacturers put it under the hood itself ...also if not there your owners Manuel may list it if not check your local parts store or even the library on the subject

Under your hood, look a the radiator support on top. there should be a sticker there. If not, go to AutoZone.com. They have a section called Znet. Just put in the infor, and it will show you a diagram.

Here are 2 diagrams, Best of luck.
Greg

Below are 2 diagrams, 1 with AC, 1 without for serpentine belt routing:

I have a 93 topaz, the diagram label is under
the hood itself.

The belt routing diagram is shown on a decal located on thehorizontal metal support above the radiator and under the hood support rod (passenger's side near the coolant overflow tank).
PT Stanley

The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.