Cracked vinyl on dashboard replace or repair ?

Different techniques and procedures depending on dashboard type - crackle finish steel, vinyl over steel, padded vinyl over steel, wooden veneer over ply, etc., etc.

Frost are the company in the know and the major suppliers of renovation materials around here and their catalogue is a joy to peruse. I believe they also offer advice. Google search produced many results - link below.

https://www.google.com/search?rlz=1C1CAFB_enGB673GB676&ei=m2dYXbHmEtPqgQbWiKHYDg&q=frost+car+renovation+catalogue&oq=frost+car+renovation+catalogue&gs_l=psy-ab.12..33i22i10i29i30.21695.62105..67408...3.2..0.239.4056.22j15j1......0....1..gws-wiz.......0i71j0j0i22i30j0i22i10i30j0i67j0i13j0i13i30j33i21j33i160j33i10.OG2BjERgXro&ved=0ahUKEwjxn6aX44rkAhVTdcAKHVZECOsQ4dUDCAo

We had vinyl siding that was vandalized (cracked, chipped). We were unable to replace it with new because the sun had faded it over time. Only fix was to hire a handyman to move the cracked and chipped pieces to an inconspicuous place on the same facing walls and caulk the cracks and chips. The swapped out pieces were placed where the chips and cracks had previously been.

3M makes a product that you can buy at an autoparts store. It comes in tubes and it is made for this exact thing. http://www.autogeek.net/3m-leather-vinyl-kit.html

Hi!!

At AutoZone or a similar AutoParts, you can get a variety of vinyl repair stuff. They usually work pretty good, depends how bad your dashboard is. It would not hurt to use a dash cover to protect the dash, also, don't forget to Armorall it.

http://www.ehow.com/how_5094620_repair-dashboard-vinyl.html

The window can be replaced just go to a foreign car used auto parts or junkyard or go to your nearest dealer for your car and have it done.

go to asy kragen, autozoneor pep boys, (and many other stores) they have dash repair kits, fairly cheap and easy to use. also check out this useful link on dash repair

http://www.ehow.com/how_2077554_repair-cracks-dashboard.html

My name is Paul I have been doing vinyl and plastic repairs full time since 1988 and i think i have came up with a method of repair for dash repair on the prado my email is [email protected]

On my Bitsasushi Lancer CE 2000 i found a Hairline crack on Vinyl PCP about 6 o'clock when viewing Cluster right way up at rear where Vinyl circuit folds over under plastic Tabs, looks like power supply to Warning Lights, i just Spent 5 mins scraping Blue Vinyl to reveal Crack a Dab of Solder a Dollop of clear Laquer(Naily-Polish) inserted Cluster