Why won't the running lights shut off

jeep liberty
I suggest you try one of those instant download manuals. My nephew bought one for me when my car broke and we could fix it all by ourselves with the manual costing $10. This website reliable-store.com is very good for this.
?Try it.

its either a bad door switch,or could be the dome override switch by headlight switch,or your interior light switch is all the way up

run fault codes to see if anything comes up

one of your door switches is bad or not making contact with the door frame

hello , you have to replace the interior light delay relay

one or more of the door switches are malfunctioning

Could be the front electronic module. The module has a timer that holds the lights on for about 60 seconds after you exit the van.

That is a really good question....what category did you post it under?

The day time running light module on the back side of the front drivers fender likely needs to be replaced to fix your problem.Unplug it and the lights will work normally from the headlight switch but the day time running lights won,t work and also the high beam indicator light in the dash won,t come on when you switch to high beam but all the lights will work properly.You should replace the drl module as soon as you can but unplugging it will at least keep you from having to remove a battery cable.

Try looking at your battery. Check the cables to make sure they are tight and clean. Brush the corrosion off with a wire brush. Now, if you have a wiring schematic, find the ground for the interior lights and clean it up too. Oh, put vasoline on it, and the battery cables, to keep them corrosion free. Check the other grounds in the car cabin too.