Here is a diagram of where the map sensor is located on this particular vehicle, i have also included the removal and installation procedures as well
Hope this helps....
REMOVAL PROCEDURE
- Remove the air cleaner outlet resonator.
- Disconnect the manifold absolute pressure (MAP) sensor.
- Remove the MAP sensor attaching screws (1).
- Remove the MAP sensor vacuum hose (2).
INSTALLATION PROCEDURE
- Connect the vacuum hose (2).
NOTE: Refer to Fastener Notice in Service Precautions.
- Install the MAP sensor attaching screw (1).
Tighten Tighten the screw to
6.5 N.m (5.7 lb in) .
- Connect the MAP sensor connector.
- Reinstall the air cleaner outlet resonator.
×