2001 DODGE 3500 WITH 5.9 CUMMINS FAULT CODES P-1596 AND P-1693

SOURCE: Charging problem on 1996 Dodge Ram 3500 Cummins Turbo Diesel

I had the same problem on a 94 dodge with the cummins. It seems the crank sensor that reads from a notch on the harmonic balancer was the problem Without this sensor reading that the engine is running the alternator wont charge. Possibly the same problem with yours

SOURCE: where is oil pressure sensor located on 2001 dodge 2500 cummins?

Hello mhak330: My name is Roger and I can give you the answer to your question. Locate the ECM on the drivers side of the engine.look for the bottom bolt holding the ECM. To the right of the bolt you should see the oil pressure sender unit. Should you need further help please just ask. Please rate the quality of your answer. This way we know you received helpful information. Thank You for using Fix Ya. Roger

SOURCE: 1999 DODGE CUMMINS SHUT DOWN FAULT CODES p1689, P1688

P-1689 NO COMMUNICATION BETWEEN ECM & INJECTION
PUMP MODULE

SOURCE: I have the following fault codes reading

P0216 - injector timing control circuit

P0234 - turbo / supercharger over boost condition

P0523 - engine oil pressure sensor / switch circuit high inout.

SOURCE: 2007 dodge 3500, 5.9 cummins,engine light on,

my 2007 dodge 5.9 cummins all dash lights abs, parkbrake, check engine lights are on. airbag, and speedometer not working