Where can I find the solenoid on a AWD transmission?
SOURCE: 2000 Dodge Sratus 4 speed auto transmission
Dave, The P0700 code is a generic fault code indicating the the TCM (transmission control module) has recognized a problem and the P0755 is the indicated problem. I'd recommend you check your transmission external electrical connector for water intrusion and corrosion at the terminals by disconnecting the connector. If nothing appears wrong, I'd then recommend you drop the lower transmission pan and take a look at the residue deposit that is laying on the bottom of the pan. You should only see a relativily minor amount of grayish, black clutch material residing there. Pay particular attention for a gross amount of this or any large particular material, including any metal, either filings or chunks, or any brass or aluminum. If this checks out to be fairly clean, then I'd recommend you replace that "B" solenoid (2-3 shift solenoid) and have the trans. pan and filter replaced.; I'd also highly recommend you have the trans flushed for anyother particular matter that may reside internally inside the transmission. You'll have to have the codes cleared and the transmission relearned for shift feel, at that point.
SOURCE: trns shift problem
On chrysler product vehicles that use the electrical solonoids inside the trans oil pan can usually just be removed and cleaned and they will usually function correctly again. They have a tendency to get laquered up and stick if the trans fluid has not been serviced regurarly. This happenes from the neon all the way up to the dodge 3/4 ton pickups with the gasoline engines.
SOURCE: transmission shift solenoid location
fault code stored in your car, you can go to garage repair it, or get a code scan tool clear it by yourself, Autel MaxiDiag US703 can do your car. hope help.
2,512 views
Usually answered in minutes!
×