For a 3.5L
Remove Cross braces above battery and air box
remove battery
remove battery tray
disassemble air box
remove engine computer
remove air box
remove radiator fans
drain coolant
remove coolant resevoir
remove serpentine belt
remove thermostat
remove alternator out hole that battery was covering.
Install new thermostat seal.
SOURCE: 1999 intrigue rear speaker help
The lower seat cushion, the back seat rest, the side trim panels and the package shelf all have to be removed to access the rear speakers.
SOURCE: LOCATION OF FUEL FILTER ON 1999 OLDSMOBILE INTRIGUE
my 98 oldsmobile intrigue keeps reving high them stalls what could be the problem
SOURCE: diagram for removing a tensioner from 99 Olds Intrigue 3.8
Either in the center of the tension pulley or on the arm that the tension pulley is bolted to there is a square hole that is the size of the square on a 1/2" ratchet. Take a 1/2" ratchet and stick it in that hole and I think most of them you put it in the tighten position and pull on the ratchet. the tension will release and you can remove the belt.
Good Luck
SOURCE: Have a 1999 Oldsmobile Intrigue 3.8l V6. The
Providing your guage is working correctly; look just inside the fan, you should see a wire coming from the fan motor, follow the wire. It will end up at a sending unit that looks similar to a fitting. This is what tells the fans when to turn on.
SOURCE: how to change the pcv valve on an 1999 oldsmobile
Remove plastic "sight shield" / engine cover (two black 13mm nuts on top). PCV valve is plugged into front (left) camshaft cover at the end furthest from pulleys. Check the elbow - if cracked one for Chryslers that Autozone sells in bubblepack will fit - just check the size with the new one.
463 views
Usually answered in minutes!
×