REMOVE HEADLIGHT ASSEMBLY ON A 2014 KIA SERENTO
SOURCE: remove headlight assembly
there is a nut on the left side of the light on drivers side,just the opposite on passenger side. you will need a deep socket. there are 2 10mm bolts on top of the assy. and on the back is a 10mm nut you will have to remove on order to remove the assy.
SOURCE: Removing Headlight assembly
There is a small hex headed fastener behind the headlight, oriented vertically. Loosen this and remove it, it is long and passes through the body of the light housing to threads below. You then pull the headlight housing forward, its still held in place by several friction fasteners so it may take a little force but it will "pop" off and then when you're through you'll have to "pop" in back in.
SOURCE: headlight assembly
Hello streets54, my name is JShreader. Thank you for choosing fixya.com.
First, you have to remove the Upper Radiator Grille. Behind the Headlamp at the top of the Front Bumper, access the lower inside hidden Headlamp Bolt. Only loosen the Bolt. DO NOT REMOVE. Now remove the 2 Headlamp Screws, then the Hidden Screw...now the Headlamp Housing should come out. I uploaded the procedure in .pdf format. You can download it by clicking HERE. I hope this helps you. If you have any more questions or need any more diagrams, please don't hesisitate to ask...Thanks again, JShreader!
SOURCE: HOW TO REMOVE HEADLIGHT ASSEMBLY 2006 JEEP GRAND CHEROKEE
remove the 7mm bolt in the centre top of lamp unit then with a big screwdriver just behind headlamp prise outwards quite firmly
SOURCE: How to remove the headlight assembly on an Acura
There will be screws in front and one or two pointing down on assembly.
You can go to autozone.com and register for full free online repair manual for your acura. It has diagrams and step by step directions on everything. Plus much much more
2,907 views
Usually answered in minutes!
×