Question about 1999 Chevrolet K1500

1 Answer

How to remove brake light switch on1999 chevy k1500 ?

Posted by Anonymous on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.


    A rookie expert who has answered 20 questions on their first day.

  • Expert
  • 77 Answers

Top off brake peddle under dash pull clip .

Posted on Sep 07, 2017


5 Suggested Answers


  • 426 Answers

SOURCE: 1994 chevy k1500

Have you checked or made your own earth source..Have you checked that you have power at the tail lights

Posted on Oct 19, 2008



  • 4 Answers


I figured out my problem!
From the VERY BEGINING... I changed my brake pedal switch with a BRAND NEW switch, and the lights still didn't work.

Well, I went back down there with a live wire and touched the contacts..and guess what.. the brake lights lit up!

I got a faulty NEW brake pedal switch!! I went a year with this problem, so learn from my issue, test even your new parts if it doesn't fix the problem to completely rule it out!

I hope you guys figure out what's going on with your issue.

Posted on Apr 21, 2009


  • 1 Answer

SOURCE: 1996 chevrolet K1500 brake light switch

The parts store had given me a booster for an 88-94 model. The the brake booster rod end clevis would not actuate the switch. After installing the correct part number component it works like a champ.

Posted on Oct 16, 2009


  • 1810 Answers

SOURCE: need to know where fuses for abs and brake light

under dash is the likely location

Posted on Jan 28, 2010


Thomas Perkins

  • 14827 Answers

SOURCE: view rear brakes 1988 chevy k1500 click on link to see brake repair.

Posted on Aug 29, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

97 chevy suburban k1500 brake lights work when barely touched then go off when pressed harder

Check your Brake Switch on the Back of your Brake Pedal, you have loose wires or your switch is not working properly

Apr 09, 2013 | 1997 Chevrolet K1500

1 Answer

My brake lights turn on but when i apply my brake they dont light up how should i fix this

the brake light switch on these older chevys were abit of a pain but replace the switch located on the brake pedal there is an adj on them it is a little tab you can move

Feb 14, 2011 | 1993 Chevrolet K1500

1 Answer

I have no brake lights on 1996 Chevy Silverado half-ton. Was going to replace switch, but it's a bear. Then I noticed I can hear a relay click when depressing brake pedal, but no lights. It does kick...

Yes the problem could be else where, but first get a volt meter and remove the tail light housing and with the meter have some one step on the brake and see if you get voltage.

Jan 08, 2011 | 1996 Chevrolet K1500

1 Answer

1989 chevy 1/2 ton.brake lights or emergency flashers dont work.tail lights an blinkers work.

The Blinkers and the Brake Lights are the same bulb. So check the brake light switch. Flashers use a different flasher unit, than the turn signals

Dec 16, 2009 | 1989 Chevrolet K1500

1 Answer

Brake lights dont work but the other tail lights do

Check the brake light switch under the dash attached to the brake peadal arm. It is wher the break booster push rod attaches. Sometimes that switch works loose.

May 18, 2009 | 1996 Chevrolet K1500

2 Answers

Brake lights

check out the brake light switch located on the brake peddle. Could be out of adjustment or burned out.

Jul 03, 2008 | 1994 Chevrolet K1500

Not finding what you are looking for?
1999 Chevrolet K1500 Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides