Fireing order diagram

Transmission sticks in reverse- won't go into park. - JeepsUnlimited

www.jeepsunlimited.com/forums/showthread.php?...won-t-go-into-park
Jun 14, 2013 - 12 posts - ‎5 authors 2003 6 cyl 4x4 Grand Cherokee Laredo automatic- Occaionally, when shifting from REVERSE TO PARK, my Jeep will stay in reverse. Typically its ... '2001 WJ'4,0L'42RE'NV 242'380000 km'ECE Compliant' ??????????? ??? ...

2001 jeep grand Cherokee laredo - CarGurus

www.cargurus.com > Questions > Jeep > Grand Cherokee
CarGurusJan 27, 2014 - 2001 jeep grand Cherokee laredo - Just purchased a 2001 Jeep GrandCherokee Laredo and ... It starts in PARK sometimes and sometimes it won't and I have to start it in Neutral. ... Hatch shuts flush, but won't stay shut. help!

Plenty of causes. Plugs, valves. rings, numerous electronic/electrical faults. Diagnose vehicle and eliminate problems one by one.

1999 Jeep Cherokee 4WD 4.0 liter L6 VIN "S"



Hope this helps (remember rated this).

That vehicle came with three different engine options for that year, there was a 2.5 liter inline 4 cylinder engine, a 4.0 liter inline 6 cylinder engine, or a 5.2 liter V-8 engine. Here are the firing order diagrams for all three engines and one of them should help you to solve your problem.


2.5 liter.





4.0 liter.





5.2 liter.

For the 1998 Jeep Grand Cherokee Laredo:
I do not know if you have the 4.0L In-Line 6-Cylinder, the 5.2L V8, or the 5.9L V8; however I have included ALL below:

For the 4.0L In-Line 6-Cylinder:
Firing Order:
1-5-3-6-2-4
Cylinders:
(back)
...6
...5
...4
...3
...2
...1
(front)

Distributor:
....(back)
.....5....3..(+)-screw
1.............6
(+).4....2

For the 5.2L V8: AND 5.9L V8:
Firing Order:
1-8-4-3-6-5-7-2
Cylinders:
.......(back).......
|..8..|.........|..7..|
|..6..|.........|..5..|
|..4..|.........|..3..|
|..2..|.........|..1..|
.......(front)
Distributor:
.....(back)
.......3
..4.........6
8.............5
..1.........7
.......2
......(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

You didn't post your engine size so please choose the apprpriate diagram:





1989-98 2.5L Engine firing order: 1-3-4-2 Distributor rotation: Clockwise






2.8L Engine firing order: 1-2-3-4-5-6 Distributor rotation: Clockwise





4.0L Engine firing order: 1-5-3-6-2-4 Distributor rotation: Clockwise





5.2L and 5.9L Engine firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise

For the 1997 Jeep Grand Cherokee:
I do not know if you have the 4.0L In-Line 6-Cylinder or the 5.2L V8, however I have included both below:

For the 4.0L In-Line 6-Cylinder:
Firing Order:
1-5-3-6-2-4
Cylinders:
(back)
...6
...5
...4
...3
...2
...1
(front)

Distributor:
....(back)
.....5....3..(+)-screw
1.............6
(+).4....2

For the 5.2L V8: (Side Note 5.9L V8 = Same)
Firing Order:
1-8-4-3-6-5-7-2
Cylinders:
.......(back).......
|..8..|.........|..7..|
|..6..|.........|..5..|
|..4..|.........|..3..|
|..2..|.........|..1..|
.......(front)
Distributor:
.....(back)
.........3
....4........6..(+)-rounded tab screw
8................5
[ ].1.........7
.........2
......(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

1-5-3-6-2-4
ALL Jeep 4.0 motors use this firing order. Any year, any model, high output or not.

Also, the spark plug wire placement on the cap, in a clockwise direction from the post nearest the engine block is: 6-2-4-1-5-3.(to the left side of the number 6 post, there should be a hold downscrew or strap for fastening the distributor cap to the distributor.
For a picture diagram, please go to this website:
- http://www.fixya.com/cars/t2859850-need_spark_plug_wiring_1993_jeep_4l
- http://www.jeepz.com/forum/engine/16923-six-cylinder-4-0-liter-jeep-engine-specs.html

Good luck (rated this help)

Check this info... Wiring Diagrams with the graphic firing order for 6 and 8 cilinders.

Good luck!!!

1994 is the same as 1997. parts are interchangeable