What is the radio unlock code for 94 acura legend

I have found a few options on the Acura forums

1. Pull out ashtray and check on back for a 5 digit code on a sticker there

2. Check for a 5 digit code on the fuse panel cover

3. go sign up at myacura.com and enter your VIN # and your radio serial # and it will give you the correct code for your car.


if you do not have the serial number for your radio handy you can find it by removing the non-use "button" between the fog light and rear-window defroster buttons. You can pop that off with a small screwdriver. Then you can read the S/N off the bottom of the radio with a flashlight

To replace ignition switch on 94 legend, first secure the car on a level parking surface, engage parking brake, chock wheels for added safety. Disarm airbags, be aware of a coded radio / sound system, ensure that the 'disarming' code is available or it may be very difficult to reset the radio. Disconnect the Neg. battery cable from the battery post. Remove lower cover panel from lower dash on driver's side. Remove electrical connector from ignition switch. Ignition key must be used to turn cylinder from 'O' to 'I' when necessary to unlock cylinder from column (Steering-Lock Pawl). Remove 2 bolt / fasteners which hold ignition switch in place - it may be necessary to cut a grove into the top of each fastener with a hack-saw or high-speed-cut-off tool if fasteners are the original round-head type. Sometimes simply trying a good pair of locking-pliers with a tight grip will be able to loosten the bolts enough to remove them. Once the old ignition cylinder is removed, clean inside the cylinder opening, install the new cylinder & secure all wiring which was removed, secure switch with new bolts, test switch, replace covers & last of all, reinstall battery connection.

You need to get the serial number off the sticker attached to the radio. It will require pulling apart your dash. Call an Acura dealership with that serial number and they should be able to provide you the code. Or you can take it directly to the dealer but you will be charged labor.

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;}





















If you can provide the necessary information then your ACURA code is available here for free

https://radio-navicode.acura.com/?src=inq

If not then the code will only be available from your local Honda Dealer or a Decoding Service ...who will plug in a laptop to read/recode your memory chip (EEPROM)

You need to get the serial number off the sticker attached to the radio. It will require pulling apart your dash. Call an Acura dealership with that serial number and they should be able to provide you the code.

Remove the radio and recite the serial and model number to an Acura dealer to get the code.

Try here for  Acura Code

You have to quote the VIN and other details

https://radio-navicode.acura.com/?src=inq

If they cannot supply it , thenit will have to be the Main Honda Dealer or a Decoding Service

You need to get the serial number off the sticker attached to the radio. It will require pulling apart your dash. Call an Acura dealership with that serial number and they should be able to provide you the code. Or you can take it directly to the dealer but you will be charged labor.

acura radio code

i have a 1994 acura ledgend but i dont have the owners manuel that holds the code. how can i bypass or get it to work