Is there a clip,that can be installed,to keep it in park?if so,how to iinstall?
SOURCE: 1997 Acura CL 3.0 Transmission recall
they install an inline filter on one of the cooling lines as part of the recall
SOURCE: Find oil filter in engine of acura CL
back side of block under intake if its a 2.2 or a 2.3 if its a 3.0 its on the passenger side of engine bay if you turn the wheel you will be looking at it
SOURCE: transmission dipstick location
Sorry, I'm just now getting it to you. The dipstick is located on the passenger side of the car way down at the bottom. It should have a yellow handle. It's just to the right and down of the battery. Let me know if you can't find it still and I will get you a picture somehow.
SOURCE: how to install a clutch on acura CL
Plenty to mention. Best way is to get the Hanyes Repair manual-sold for around $20, with plenty of stuff in it. A few things:
Disconnect battery.
Take off starter-motor.
Remove brake calipers, and tie them to struts.
Remove front tires.
Disconnect clutch master-cylinder
Jack up the car and support it on jack-stands.
Unbolt the clutch-housing from the engine, drag it out.
Installation is reverse of removal.
Testimonial: "Thanks! This should help"
SOURCE: acura cl alarm problems???
To all you Acura alarm sufferers. In the immediate term to appease your neighbors - open the door and reclose, leaving the door ajar enough that the interior door light is still on. Be sure to turn off the roof light so no one is cued your car door is ajar.
When you can go under the hood, remove the fuse - I think it is 15 - the fuse box cover has a diagram. I left the fuse out for a couple of hours and reinserted it. That broke the pattern for 7 months.
It is 89 degrees in chicago today, the alarm went off at the train station and I got a ticket for noise disturbance.
It's time to look at the fuse box again. i think extreme temps are the problem.
49 views
Usually answered in minutes!
×