Started car put foot on the brake and the shifter lever will not go into any gear at all how do i fix it
SOURCE: dodge magnum gear shift
I had the same problem. The interlock was not the problem. I had the shifter replaced (at my own expense because drive train warranty would not cover). After examining the old shifter discovered source of problem is a plastic cam on the front of ths shifter. A tiny PLASTIC ear which connects to a small spring had broken off. I repaired this by putting in a small screw where the ear had been. Incidentally, my tow truck driver had also seen the same problem on several Chrysler 300s. In my estimation this is a poor design on Chrysler's part.
SOURCE: cranks fine, want move from park position
water intrusion in the junction block is kina what it sounds like to me.
they were doing a recall on this vehicle.
there was corrosion happening to the wires.
SOURCE: I can't get my 2005
First thing to check is your brake lights. The brake interlock for the shifter relies on the switch that turns your brake lights on. If it's not working, you won't have brake lights OR the ability to move the shifter out of park. In an emergency, most of these vehicles have a small plug near the shifter that you can remove, push a button, and move the shifter without pushing the brake pedal.
Good luck.
274 views
Usually answered in minutes!
×