1994 Chrysler Concorde Logo
Posted on Jul 04, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

94 concorde as stated earlier car wont start. changed fuel pump it pumps when i jumper wired the fuel relay. changed cam sensor changed knock sensor changed coil pack.when turning key car cranks over no power to coil fuel pump etc. fuses and relays under dash and hood are ok

  • Mike Butler
    Mike Butler May 11, 2010

    Checked, Auto shut down relay ?

  • Anonymous Aug 16, 2012

    i did all of that still nuthin

×

1 Answer

Ronny Bennett Sr.

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Chrysler Master 6,988 Answers
  • Posted on Jul 04, 2009
Ronny Bennett Sr.
Chrysler Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Feb 28, 2009
Answers
6988
Questions
2
Helped
2285826
Points
21993

Change crank sensor? if so replace control module (ignition module)

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I have a 94' chrysler concorde. How do I check to

Have someone stand or lie down close to the gas tank when you first turn the key on WITHOUT STARTING IT. They should hear the pump running to build up pressure. If not, check the fuse box under the hood for a blown fuse or bad pump relay.
0helpful
1answer

I have a 94 chrysler concorde. The problem is it won't start, I have replaced the fuel pump and the fuel pump relay fuse. And it still won't start. What should I do now?

check see if you getting spark if not.have vechicle code scan could have faulty ECM .faulty camshaft sensor and crankshaft sensor.make sure engine has been tuned up.replace fuel filter change spark plugs and wires. before engine can run need fuel and spark.either one not working car will not crank.
0helpful
2answers

1994 CONCORD NO POWER TO FUEL PUMP, NOT FIRING AND DOES TURNOVER, REPLACED CRANK SENSOR AND CAM SENSOR, TRIED DIFFERENT RELAY FOR FUEL PUMP-STILL WON'T START?

NO POWER TO FUEL PUMP......CHECK ALL IN LINE WIRING
NOT FIRING... START WITH COIL PACK, DIST CAP ETC...PLUGS/WIRES??????
"HOT WIRE" (DIRECT W/ FUSED JUMPER) TO FUEL .PUMP....NO - GO,,,BAD PUMP
0helpful
1answer

I am starting problem with my chrysler concord 2000 3.2 if din't start it for more than 10hrs this problem happens when i try to star its cranks but wont start i did the test at chrysler and they...

make sure the fuel pump relay is working. just put one in from another place. same size, to see if thats it. or your fuel pump is bad. is it getting spark!
1helpful
2answers

My 1995 Volvo 850 will not start. I think it is the fuel pump. I tryed a procedure where I removed the fuel pump relay and jumpered the sockets for blades 85 and 15. there was no help in starting the car...

another way to test it
unplug any fuel line you can locate tell a friend to start key one turn only if the line squirts fuel then pump is working and it might need regulator
if not then pump is gone
2helpful
1answer

Where is the Fuel Relay located on a 94 Oldsmobile Bravada?

the fuel pump relay is on the driver side firewall its a bracket with two relays on it. the relay closes to the fender is the one for the fuel pump. if you want to do a quick test of the relay is to run a jumper wire from orange wire to the grey wire you pump should start working.if it does work then replace the relay. if it doesnt work. run a jumper wire from the battery to the grey wire if the fuel pump still doesnt work replace the fuel pump, however if it does work you have a short in you wires. a good back yard fix for this problem is to run a wire from the battery to the orange wire. hope i didnt confuse you let me know if you need more help.
1helpful
2answers

Chrysler wont start

I CHANGE CAM AND CRANK SENSOR,FUEL PUMP,COMPUTER BRAIN BOX AND COIL PACK STILL GETTING NO FIRE UNLESS I JUMP A FIRE WIRE FROM BATTERY
Not finding what you are looking for?

633 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...