Question about 1995 Honda Accord
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Radio code for 95 Honda accord
You’ll have to get the audio system serial number and take it to a Honda dealer. They should be able to get that information for you. Since your local Honda dealer is being such jerks, you can go through Customer Service at American Honda Motor Co. They provide a service (at https://radio-navicode.honda.com/) to help retrieve Radio and Navigation codes (for free). Your phone number and ZIP code must match those on their file, so be sure to get that information updated before you start the retrieval process.
Posted on Dec 17, 2008
SOURCE: vss for honda accord 95
there is a ten millimeter bolt holding it in remove this then depending if you have a factory or afterrmarket replacement you may have to remove the three tourqe scews fom sensor and replace just the electrical portion of the swith and reuse the shaft. Be sure to lubricate the shafts oring before reinstalling and double check to makesure the sensor is seated before installing the ten millimeter bolt. this can some times be tricky because the gear on the sensor doesnt mesh eith the gear in the diff just rotate the sensor side to side if this happens until it bottoms out
Posted on Feb 01, 2009
The switch is located on the foot brake lever. there is a pin to pop off, then pull the switch off and disconnect the plug fairly easy to do
Posted on Jun 15, 2010
Tips for a great answer:
Jan 23, 2016 | 1992 Honda Accord
Oct 08, 2013 | 1995 Honda Accord
Sep 24, 2013 | 1992 Honda Accord
Aug 12, 2013 | 1995 Honda Accord
Nov 08, 2011 | 2009 Honda Accord
Sep 08, 2008 | 1995 Honda Accord
101 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: