My 2006 e200k has come with the abs esp warning and says visit workshop. Thereafter the ABS light stays on. I travel from PMB to Durban and I need to drive back to PMB. I drove from PMB with no problems. Please advise
If the car hasn't gone into "limp home mode" then you should be fine to drive it but go easy on the brakes as there won;t be any ABS to help assist with heavy braking.
SOURCE: ABS/ ESP light came on on my 2000 E320 / Brake lights not working
my friend had the same and he justreplace the brake switch.
SOURCE: ESP,ABS and brakelights comming on
hello,good day,try to replaced your brake light switch,this switch have 2 function,for brake light and for esp and bas module,ty
SOURCE: My Mercedes ML 270 cdi ABS etc lights and gearbox.
SOURCE: ESP warning light is indicating.
In your car Electronic Stability Program system included many different sensors (yaw-rate sensor, steering angel sensor, body acceleration sensor, some more) if ESP visit Workshop message appear on your instrument display It's very hard to say witch sensor could be the fault without right diagnose most common faults are either steering angel sensor or yaw-rate sensor might be some other sensors if you replace yaw-rate sensor it's need to be calibrate by diagnose computer, if replace steering angle sensor it's need to do right way otherwise when you tern steering wheel fully left or right it will brake at first time then you have to be replace another one so like to advise you to get right diagnose and repair buy Mercedes specialist if do some thing wrong it's be more cost to you if you get right place to do it only you have to pay once.
216 views
Usually answered in minutes!
×