If this is a manual box then the problems can be loose gear box bolts, incorrectly tensioned bell housing bolts, spigot gearing failure in the input/ out put shafts or bearing failure for both shafts. After removing the shifter turret check the operation of the shifter rails as it may be a faulty selector fork ( both gears are controlled by the same fork)
SOURCE: 1996 Z28 camaro
sounds like transmission shift solenoid also make sure ur plugs and wires are good or u can get a similiar prob
SOURCE: transmission wont shift
check the kickdown/throttle valve cable. It may be bound up and stuck in the maximum position giving you extremely late shifts.
There ISN"T any modulators or vac lines on any Chrysler automatics
SOURCE: 4l60e slips in 3rd and 4th
There are to many things that can cause this problem, best thing to is go get the ECM scanned for DTC codes at a transmission shop or Auto zone or Parts Source since they scan for free.
The ECM should have DTC code in it's memory on how the transmission is Performing and have the Transmission line tested for Fluid pressure.
Good luck and hope this helps. Oh and also ways check with more then on transmission shop if there tell you that you need a new Transmission,
It could be a simple as the transmission filter falling off causing the lost of transmission fluid pressure. Check the transmission fluid too.
SOURCE: 92 Accord Automatic shifting
Has anyone change the transmission fluid and used anything other than Honda ATF-Z1. If so, have the fluid/filter changed in this car and use only Honda Fluid. This is the only fluid that you can use in a Honda. Even if you have used the correct fluid an fluid/filter change may help. If that is not the case then I suggest you seek out a trusted professional.
SOURCE: Hang up in third gear loss of power
Hi All
I have a s40 1.9d / 2000 plate,
In the last month or so the car loses revs when changing up to 3rd and 4th gear, I can only get 50 mph max in 3rd gear 80mp in 4th.
The car has just clocked 185,000 miles
Its a great car but a pai at the moment, I've had a service including fuel fillter change added fuel cleaners to the deilsel all to no avail
Any suggestions
95 views
Usually answered in minutes!
×