Without being able to be there to point it out, I'll attach a link and picture to help show where the actuator is located. It's on the right side of the heater housing, under the dash.
It should look like this:
Here is an exploded view of all heater parts.
The actuator will be part # 45 in the diagram.
HEATER BLOWER ASM Fits Chevrolet Cruze Tonkin Online Parts
SOURCE: Blend door
ok first put you front seat down and back raise steering wheel . now lay on you back with you head in the drivers floor board. look up see 2 screws remove them and the panel they hold on . look to left main wire harness needs to be moved to the right , up and behind it is th blend actuator 7/32 socket to remove it then manually turn the white peg , total labor 30 min
SOURCE: constant high heat
on climate control press off and heat button and let go quickly. Then press automatic. The display will start rotating eventually displaying a code 025,125 , 024 etc. Then press defrost to stop. You may hear blend door operating atb that time. It worked for my climate control.
SOURCE: blend door actuator needs replacing does the
no it doesnt ... check out heatertreaters.net if you have to replace the blend doors .... but the actuator is directly behind the glove box...remove the glove box take out 3 screws and remove actuator and replace.....waa laa
SOURCE: how to replace blend door actuator in a ford
I recently did mine, I hear you can do it without taking the entire dash apart but I had no luck with it myself. I have to get ready for work but, on mine it was located down and to the left of the radio. its a white box...are you hearing a clicking noise or something? I had to roll the entire dash back and it was still a major pain getting it out.
11,873 views
Usually answered in minutes!
×