I went on vacation and didn't drive my 02 Toyota Highlander for 3 days. When i got in to drive it after it had stormed the night before, the check engine light was on, the vsc light was on, and the trac off light was on.
I tried to change the trac off but the button wouldnt work. It has no traction on wet roads and hydroplaned easily.
Go get the codes pulled at auto parts store.
SOURCE: Why is the vsc light check engine light and trac
to reset for a momentany malfuntion,disconnect the negative battery terminal few minutes, reconnect,start engine and drive to check
SOURCE: my VSC trac, TRAC off & brake light is on
I have a 2004 sequoia with the same problem. VSC TRAC, TRAC OFF & brake light comes on at the same time. Sometimes just the brake light and other times all three. Sometimes no lights. Does anyone have a fix?
SOURCE: 2004 Sequoia. VSC TRAC, TRAC OFF, and Check
It is not hard to change the sensor, it just screws into a threaded hole. The light will not go out immeditaly, after the sensor is replaced. It needs to go thru a drive cycle. Your best bet is to replace the sensor and get the code cleard by whoever scanned it for the 0031 code.
SOURCE: 2004 Toyota 4Runner, Regarding The VSC TRAC and VSC OFF lights
Check your switches for the VSC, some get bumped on (due to their location) and some get stuck in the "on"position.
SOURCE: check engine light came on ,also vsc off and vsc
could be alot differnet things u need to take it some where to have codes scaned on it more than likely it a bad speed sensor but cant tell for sure until codes are scaned
3,806 views
Usually answered in minutes!
×