SOURCE: how to gain access to the headlight bulb on a cadillac escalade
pop the hood. locate two long metal pins - one goes in horizontally, one goes in vertically. Pull the pins and the assembly comes out. remove top rubber cover. Unplug bulb. Remove. Replace. Repeat.
SOURCE: Headlights cut out after being on 10 to 15 minutes
I had the same exact problem. I found that I could make the lights come on by pushing on the top connector on the front side of the lighting control module (LCM). I pulled the connector off, cleaned it and put it back together with some dielectric grease. Only time will tell if I fixed it. On my car, it would only have problems after the headlights had been on for about 3 hours; kind of hard to re-create.
SOURCE: headlights wont work on 2000 Cavalier
Did you try the hi beams ? If they work, could youpossibly have 2 burnt out low beam bulbs.? I'm a pro, but it faked me out one time.
SOURCE: FUSE KEEPS BLOWIN (STARTER, IGNITION, & FUEL # 8 FUSE)
you need a new starter I just went through this problem had my starter changed and have not blown any fuses in days....oh and by the way getting to the starter was not and easy task.
SOURCE: My 2000 plymouth neon cuts off on me after i
If your check engine light is coming on, then there should be a trouble code stored in your computer to tell you what area to look in for problem. Run into an autozone, or Pep Boys & get a free scan and see what they say comes up for codes & then if not obvious what the problem is, get back to us & we'll help you out.
Testimonial: "hey thanks for the advice, i did what you said and the code was a p1390. do you have any clue on how i can go about fixing whatever the problem is?"
516 views
Usually answered in minutes!
×