No trouble with car other than wont hold memory
SOURCE: 98 PLYMOUTH GRAND VOYAGER WONT START - BLOWS ENG FUSE - HELP
You have a shorted engine harness, this is not common but it does happen, heat and engine movement cause damage to the harness, this is most common on hi miler cars and vans, the only way to fix it is to start by looking anywhere the harness rubs, that is where the damage occurs.
SOURCE: 1998 plymouth grand voyager
bet it is electrical. remeber K.I.S.S
keep it simple stupid
check all electricl componets first. a local shop can ppul down codes for about an hour labor charge.
SOURCE: 1998 plymouth grand voyager cruise control relay/fuse location?
Check under hood in box marked fuses & relay, on drivers side and look under cover of it for I.D.
SOURCE: grand voyager problems
I ran into this problem this past winter and after going threw everything I finally solved this problem by taking off the fast idle servo and cleaning behind it with solvant If it gunks up in their it cannot function properly causing it to stall when idiling or coming to a stop. Try this simple solution it will more than likely work for you and keep it from stalling.
SOURCE: how to change 1998 Plymouth grand Voyager front sway bars
unbolt the sway bar links from the control arms and the two brackets holding it to the frame. make sure if you jack it up jack up the front end. if you jack up one side and not the other and take the sway bar loose it will be loaded and could cause injury if not careful as long as both front tires are off the ground the sway bar will not be loaded and will be safe to deal with
103 views
Usually answered in minutes!
Hi terry clark, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? What do you mean it won't hold memory?
Hi terry clark, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? What do you mean it won't hold memory?
×