Not on a guess-- surely
Still has to be driven & the problem diagnosed,
no matter what kind of guess your given
Have to find a problem before you can resolve it
Trying to figure it out
You need vehicle knowledge & experience to figure it out May be a transaxle problem I would not be using it
Thanks for the information
×
SOURCE: I accelerate my 2000 neon, and it vibrates and get grinding noise
Check the front drive axles and boots. A bad cv (constant velocity) joint can cause this.
SOURCE: '95 tahoe making noise when accelerating; sounds
no it should not spin when is in 2wd thanks
SOURCE: honda ridgeline key fob program
If it is a factory keyless system than you do need it done by the dealer, but if it is an after market system then reply back with manufacture and model.
SOURCE: Noise in front end 2002 zr2 blazer
Two things maybe your problem:1 .Front axle actuator to engage 4wd is not releasing. 2. Front axle u-joint needs replacing. Lift car on jacks with front end off ground. Then spin tires by hand as fast as you can and see if you hear the noise and where it is coming from ( spin in both directions).
Testimonial: "Thank you! It was the actuator that was causing the problem."
1,105 views
Usually answered in minutes!
×