How can I clear Disc Error message in CD player or how can I get it to play a CD?

a blown fuse or DVD internal fault
if not a fuse
take it to a jeep service center

Both. Check the power line that is supposed to power the clock and memory circuits when you turn off the ignition.

And your player has lost the ability of the laser to focus on the disc - hence the error message.

Cd Player Error - Kia Forum

www.kia-forums.com/2003-2010-sorento.../59783-cd-player-error.html

May 11, 2010 - 10 posts - ‎5 authors
... Kia Picanto Forum · Kia Rio Forum · Kia Sephia Forum · Kia Sorento ... Have tried a whole range of CDs (copies and originals) but doesn't like ... If the negative battery cable idea doesn't work, try to remove the .... Last edited by pulsar86; 05-13-2010 at 01:42 AM. ... 5 Attachment(s) Kia elan T8D engine vs. Change Rear/Front Speakers 2006 Kia Rio (for ...
10 posts
Jun 28, 2011
Resetting the radio - Kia Forum
2 posts
Jun 9, 2011
Kia picanto 2010 cd player removal and mp3 - Kia Forum
9 posts
Dec 29, 2010
Replaced battery and cd player/radio quit playing ...
10 posts
May 7, 2008
More results from www.kia-forums.com

Remove Power Supply Fuse For Twenty Seconds if CD ...

Actualy, I don't have any idea why your 6 ddisk CD Changer is not loading but my best advice: dispose of your multiple disk palyer. It's a "better mousetrap". Just install an XM radio or an MP3 player. In my car, I listen a 4 Gb pendrive with about 800 music files Last time I was in the US I rented a car with XM and hadn't even needed to touch the radio from Miami to Jacksonville.


Audiovox XM Snap XSN1V1 XM Satellite Radio Receiver with instant plugin

Amzdeal Car Kit MP3 Player Wireless FM Transmitter Modulator with USB SD...

Amazon com Sirius Satellite Radio Electronics


Amazon com Sirius Satellite Radio Electronics

so is this a stock RAD/cd?
stock JBL 6 disk player in dash>? or? what? name and model #
mp3 and wma format. but not DVD
or
JBL premium 4-disc in-dash CD changer
io the single disc player, 3 kinds sold. new.

and now comes the big question.
TELLS where you got the disk, or name it, or tell how it was made if home made. we dont know that.

is said CD a CDDA? or not. (always try CDDA first)
is CD a real music disc. from a real store, CDDA, is that.
or CDR, or DVDr, or CDRW, or other record-able media
is music MP3? files.
see, the old units dont play modern media.

try 2 real discs, not scratched.
do they play?
one other way, is to name the radio, brand, like JBL then get the
p/n off it. (hard) then look up the product data sheet on it,
bingo, what it can and can not do is there.

but this does it all, mostly
does what yours will not do.
http://www.flyaudio.net/product_id.asp?id=113

this meens the cd player needs a cleaner disc put in it or new player

Subject: Radio With Six Disc CD Changer Does Not Recognize Loaded CD And Displays An "INITIALIZING" Message, CD Will Not Play, CD Cannot Be Ejected, Or Disc Icon Does Not Illuminate (Reprogram Radio)
Models:
2005-2006 Chevrolet Avalanche, Suburban, Tahoe
2005-2007 Chevrolet Colorado, Express, Silverado Classic, TrailBlazer
2005-2006 GMC Yukon, Yukon XL
2005-2007 GMC Canyon, Envoy, Savana, Sierra Classic
2005-2006 HUMMER H2 with Six Disc CD Changer Equipped Audio System (RPO UC6)
Condition
Some customers may comment on any of the following conditions:
• The CD loaded in the radio will not play.
• The CD loaded in the radio will not eject.
• The disc icon on the radio will not illuminate.
• The radio displays an "INITIALIZING" message for approximately 30 seconds after vehicle start up.
Important: Do not attempt to play CDs with paper labels on them in this CD player. The labels may warp or wrinkle and jam the CD player mechanism. Refer to the Compact Disc Care and Cleaning procedure (Document ID# 1656123) in SI for more information.
Technicians are to reprogram the radio with new operating software using the following procedure:
1. If the radio has a CD(s)2008 General will be necessary to reset the radio and remove them
before the radio is reprogrammed. Remove and reinstall the radio fuse to reset the radio and then eject the CD(s). If cycling the power to the radio does not allow the CD(s) to be removed, the radio may have another failure that will not be corrected by the reprogramming procedure that follows. Refer to the Diagnostic Starting Point - Entertainment procedure in SI to begin your diagnosis of this failure to eject CDs concern before reprogramming the radio.
2. Reprogram the radio using the Service Programming System (SPS) with the latest software available on TIS2WEB. Refer to the SPS procedures and the Radio Programming and Set procedure in SI for more information. As always make sure your Tech 2® is updated with the latest software version.
3. Verify proper operation of the radio and make sure that all CDs can be ejected.

Hope helps (remember to rate this).

there is a problem with the laser or the disc motor is worn out and not spinning at the required 600 rpm

try using a lens cleaning disk

(what is the error_)?