Question about 2001 Mercury Villager

1 Answer

I am not finding the slot for the jack behind the front wheel and the manual doesn't have any diagrams. Can anyone help me with this?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Mercury Master
  • 5,302 Answers

This info is probably for a floor jack. As far as that scissor-jack that it shows in your owners manual, I'd have to look for the placement. Be safe. There are safety issues when raising and supporting a vehicle. Safety is your responsibility. Use quality jack stands I am not finding the slot for the jack behind the  - 25330782-ambctnuqwl1rngkhxnwm5kil-5-0.jpg

Posted on Dec 20, 2014


1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where do I place the jack for drivers side front tire

There should be a diagram in the spare tire compartment or on the jack itself. Usually the jack goes just behind the wheel on the underside of the body

Sep 25, 2014 | 2005 GMC Envoy SLE

1 Answer

Subaru Tribeca: Front screen washer doesn't work

AutoZone has free repair manuals online. Should be able to find fuse locations.

May 10, 2013 | Subaru Tribeca Cars & Trucks

1 Answer

How do I check the vacuum system for 4x4 on F150 2006

Get this manual online at and get complete guide on whether to repair or not, service it, and how to repair etc, along with wiring diagrams, electrical diagrams, torque specs, error codes, everything.

Mar 01, 2018 | 2006 Ford F-150

3 Answers

Cant find jacking points

if you can find the jack there should be a picture on it, one spot is usually behind the front wheels just inside the sill(pinch weld), its like a double layer of steel(reinforced).

Nov 10, 2012 | 2009 Hyundai i30 1.6

1 Answer

Where do I find the turn signal flasher on a 1995 ford ranger?

You may need to get a shop manual to get the wiring diagrams.
You have a flasher for the hazards and one for the turn signals. They are two different circuits. It is unlikely both have failed at the same time.
One flasher should be on the fuse box under the dash and the other is probably behind the radio.

Sep 10, 2012 | Ford Ranger Cars & Trucks

1 Answer

2005 ford focus zx4 fuze diagram/ fuze diagram

No fuse? Or no slots? If 53 has little metal terminals inside the slots to accept a fuse, then fuse it! Someone pulled it out and put it into 52. If there was a previous owner who blew his heated seat fuse, maybe he traded his back-up lights for a cozy heated seat!
If, however, #53 has nothing there, like just an empty place of the fuse box-not wired, then indeed, strange. Is that the owner's manual you referred to? That should be accurate, if it's the owner's manual. Look closely at that #53
Good luck..

Jun 27, 2012 | 2005 Ford Focus ZX4

1 Answer

Noise And Vibration 2005 Buick Rondezvous making a growling noise and vbration from front end,Have put on new tires,brakes,and had alligned and still no change.It is al wheel drive.

With the front end on jack stand's put the shifter in neutral put your hand on the coil spring spin the wheel as fast as you can with the other hand see if you can feel any roughness in the bearing.Do the same on both side's just because you can't feel play in the wheel bearing doesn't mean it's good.Let me know what you find.

Apr 12, 2012 | Cars & Trucks

1 Answer

Front wheels not turning in 4wheel drive 1996 dodge dakota

Check and make sure the transfer case is adjusted right If the front end was broke you would know it. Jack up one front wheel and put it in 4wheel drive but not lock and see if the front drive shaft turns if it doesn't you need to adjust linkage or if it's electric make sure the signal is getting to the transfer case. If it only locks front and rear jack up one rear wheel also and do the check. Most people with 4 wheel drive don't know they have two wheel drive One in the rear and one in the front unless you ordered a locking dif from the factory they don't come this way. Then you would have 3 wheel drive

Dec 02, 2011 | 1996 Dodge Dakota

1 Answer

Jack placement on a 2002 chrysler 300m to fix a flat tire

Typically on Chrysler the lift point for the front tires is located just behind the wheel and for the rear just in front of the wheel. When you remove the cover that is over the spare tire there should be a diagram showing these. The User Manual will also designate these. These all assume you are using the original issued jack.

Jul 11, 2010 | 2002 Chrysler 300M

Not finding what you are looking for?
2001 Mercury Villager Logo

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

gerry bissi

Level 3 Expert

4388 Answers


Level 3 Expert

85222 Answers


Level 3 Expert

5692 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides