SOURCE: MY 2005 PONTIAC G6 6
yeah dude that happened to me, i put subs in my 05 g6, it supposedly happens when the battery dies or u undo the batter, so i took it too a dealership and they tried making me pay $30 for them to tell me it doesn't work so being the angry person i gave them a few choice words and got out of the nice 30 bucks but they will make u pay for a new stock system for a nice $350 bucks which i told them to go screw themselves and i put the dash kit in so i could read the mpg temp and all that and just put a dvd player in it was better and looks better. and to get ur discs out u pull the stock system out get a screw driver and pliers and start taking the junk apart to get them
SOURCE: program instruction garage door opener in 2005 chrysler pacifica
if your garage motor have rolling codes you need to put your car inside garage near the motor leave ignition on go to the motor locate learn button press it then quickly go to the car and press and hold one of the buttons for approximately 30 sec or until it start blinking rapidly, if you have a regular motor take one hand held opener go inside car ignition on same time press open button on handheld remote and on the car button 30 sec and it should be programmed.
SOURCE: 6 disc changer will not eject cds==
One common solution is to disconnect the negative battery cable for 10minutes. When you reconnect, the stereo should reset itself and allow you to eject your CD's . Best of luck!
Greg
SOURCE: 6 disc changer will not eject cds==
I had the same problem for months. I checked the owners manual, checked the fuse box, everything I could think of. Then, today, I did some online research and someone said one of the CD's is probably just jammed or slipped out a bit. The suggestion was to gently slide a credit card over the disk (through the door/slot, which in my case was partially open). I just tried it. The door closed and the message said "initializing". It worked! The CD player is back to normal.
239 views
Usually answered in minutes!
×