I have a stock radio from a 1995 Kia Sephia, a kia logic control. I have the code to use, but when I do what the manual says the radio comes up with HOLD.

No one on the internet has your radio code
Call a dealer for help on where to get the code
& how to install if you have no owners manual.

IAC is upstream of air filter.

Several aftermarket suppliers stock that switch assembly, including AutoZone, CarQuest and Advance. You will need to tell them if your vehicle is equipped with intermittent wipers and/or cruise control.

go to any auto parts store and buy a haynes manual for your specific car. they are based on a complete teardown of vehicle. this manual will help ! for about 20.00 dollars. have a good day !

You will need a unlock code to get your radio working again. Radio security codes are usually written in your car manual or given to you when you purchase the vehicle. If you do not have the radio security code, you would have to obtain it from the local Kia dealer.

Hope this helps

check to make sure that your mass air flow sensor is working properly and your clean air supply to the throdle body is all connected and functioning. allong with the sensors connected to that. it sounds like your cars mas air flow sensor is giving an incorrect high reading to your ecu...so your car thinks it is taking in more air than it is... the fuel injectors are trying to compensate for the high air flow but because that air flow does not exist the car stalls.

It should be connected on the transmission.

You will need to contact the dealer. Radio codes are only supplied thru the dealer or you can search online for places that sell the code.

Chances are you will need to pay for the code or replace the radio with one that is an upgrade with no code needed.

hallo
manual transmission of a mazda 323 dont fit on your Rio. only thing that fits is mazda 121 on kia pride. all other combination dont fits.
marko

can you send it on [email protected]