How to reset timing belt light of 2kd-ftv hiace 2006 model

wow NO YEAR TOLD.
no car told at all,just vague 2kd , hint, (a true challenge that)
it is some kind of toyota, but they have vast vast models.
some models sold are 40 million sold by them.

real name and is a DIESEL.
2KD-FTV???????????? 2001 sold first in a hi-ACe truck never sold in USA< this truck.
2.5 L ,2005 CRS, common rail injections at 29,000 PSI. 2000BAR
seen first in UK market, so says WIKI, my guiding light to the no car told pit.

this engine is used in the Toyota Hilux, Toyota Fortuner, Toyota Innova and Toyota Hiace. In some Central and South American countries, Toyota also offered this engine on the 2003-2006 4Runner in limited quantities.
to get specks on car or trucks we need year and model
books are indexed and sold by year and model and country
that is how the world works , sorry.

my guess

1. bad fuel
2. injectors partly clogged
3. fuel rail pressure out of spec,
4. we scan it as some engines have rail sensor there. and moe.
5. filters clogged. any.

not bad glow plugs, as it does start.

Appearing in November"2001, the 2KD-FTV is the 2nd generation of the KD series of engine with a smaller 2.5 L (2,494 cc) displacement and went on sale in the UK market in the 2002 Toyota HiAce
so is HIACE and a secret>? name of car and year both a secret>
Diesel engine,
engine stalls may be lost of diesel fuel pressure to the injectors.
check pressure yet?

no HIACE here USA.
so no manuals to quote spec to you.
get the service manual for your truck and do the tests there.
for stalls.

No friend, it isn't by the air filter. It's the unit that is connected to the intake and the air filter flex hose goes to it. This MAF is mass air flow, and there is a wire across the venture of the unit on the inside. First, purchase a can of Mass Air Flow Sensor Cleaner from an auto parts store, CRC makes this spray cleaner made special for this sensor. The sensor IS the wire that runs across the venture of the MAF. Take the MAF unit off the manifold and air line from the filter, it just bolts on, keep your fingers and anything else away from the sensor, and spray it real good with the MAF Sensor cleaner. Spray the venture also to clean the bore of the unit. Put it back together and if, in fact this MAF sensor was the problem, the cleaner spray will have taken care of the situation.

Black smoke is a fuel problem how is it running is it missing is it hesitating does it bog down when you press the gas pedal is the check engine light or service engine soon light on need to know before can give answer

ck for fuel leaks and ck the fuel filter , and the fuel pressure at the mainifold could be a bad pump same symptons filters are know for this issue,

POINT OF CORRECTION:THE ENGINE SHOULD READ 2KD-FTV AND NOT 2LD-FTV. FIRSTLY DO THE DIAGNOSIS. IT WILL TELL YOU WHICH SYSTEM HAS CREATED A PROBLEM.THAT WILL GUIDE YOU EASILY.

It could be the reluctor ring on the crank shaft.

Hi. Thanks for your question. For Torque specification for engine of model 2KD-FTV Toyota you can visit https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!

if it has a digital odo/ press trip knob until odo is displayed/ press and hold , turn ignition , hold for 4 secounds , release and press again, number 10 will be displayed, keep pressing until 20 comes up, press until odo reading is displayed again, turn ignition off , turn on again , notice the t belt lamp turn off in appros 5 secounds / if not able to reset try this again