How do I lower my 1993 s10 pickup in the front using lowering keys?

Your 1993 S10 can only be lowered by using drop spindles or lowering springs.

Nikodemus Sogalrey
How do I lower my 1993 s10 pickup in the front using lowering keys?

Lowering keys are a common method to lower the front suspension of a 1993 S10 pickup. Here are the general steps to lower the front of your S10 pickup using lowering keys:

Park your truck on a flat, level surface and engage the parking brake.

Loosen the lug nuts on the front wheels.

Use a jack to lift the front of the truck and support it with jack stands. Make sure the jack stands are positioned securely under the frame.

Locate the torsion bar adjustment bolts on the lower control arm of the front suspension.

Use a wrench to loosen the adjustment bolts on both sides of the truck. You may need to spray some penetrating oil on the bolts to help loosen them.

Slide the lowering keys onto the torsion bar and make sure they are seated properly.

Tighten the adjustment bolts back up, being careful not to overtighten them.

Lower the truck back down off the jack stands and remove the jack.

Tighten the lug nuts on the front wheels.

Take the truck for a test drive to make sure the suspension is adjusted properly.

Note: It's important to keep in mind that lowering the front suspension of your truck can affect the alignment, tire wear, and overall ride quality. It's recommended to have a professional alignment performed after lowering the front suspension to ensure safe driving and optimal handling.