There is a spring loaded tension pully that needs to be depressed. I believe is has a 1/2 inch square socket female end on the front of tension pully that you can use a 18" or 20" breaker-bar to get leverage to reduce the tension. Reduce the tension remove belt and just reverse the process to install new belt.
SOURCE: 1999 Chevy express 454 belt diagram.
454 with ac and a.i.r.
Testimonial: "You da Man!!!!!!!!!!!!"
SOURCE: 2004 chevy 3500 express passenger van transmission
if ur replacing it remove front grill disconnect both lines and carefully remove retaining clips from radiator if replacement is original eguipt mount & reconnect --if its a universal follow instructions usually cut off fittings and use clamps and hose to hook up
SOURCE: I need the serpentine belt diagram for a chevy Express Van
DRIVE BELT DECAL SHOULD BE UNDER THE HOOD.OR YOU CAN GO TO DEALERSHIP GET ONE AUTO ZONE OR ADVANCE AUTO PARTS CAN GET YOU ONE.OR YOU CAN BUY A HAYNES REPAIR MANUAL IT HAS BELT DIAGRAM.
SOURCE: I need a serpentine belt
When I bought a new belt for my Jeep, the Auto-parts store furnished me a diagram, specific for my vehicle, and how it is equipped (air cond. etc.)
I dealt with NAPA auto parts, but any good parts store in your area should do.
You may also be able to find one online.
180 views
Usually answered in minutes!
×