At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
U need to make sure that the antena cable is conected at the back of the radio and not broken. If the problem persists take it to a specialist to work on the reception, its minor u wil b enjoying your reception now. Vote if it works. Good luck.
It may be more of a design flaw oppose to a actual problem. However, you can purchase signal booster that simply plug between the radio and the cars antenna.
It is the overriding by intersteller priority dimensional language conversion filtering. Nothing to worry about, It can be easily defeated and modulated by tightening your removable Radio Antenae.:-) Good Luck_Ned_
u don't need a wireing diagram check the wire that runs from the antena to the stereo and the connections. usally the connection to the antena gets corrsion in it. so just clean up the connections
The radio has a built in small power sourse to increse reception. A reception booster..
That power sourse may be failing..
Very common on the stock stereos..
In my opinion - it it worth wile to have a brand name stero installed.. It is not real expensive to do..
Note; Thank you for posting your question on FixYa.com We are helping people on a points system. If the information provided here was at all helpful, please be kind - rate well and close the post. Thank you – and enjoy your day;o)
im guessing the antenna has been replaced and wires were mixed up. take the rear panel off in the trunk to give access to the antenna motor and look at the wiring there should be 2 small wires and one larger black wire. the black wire is the reception wire the other two are the power wires. switch the positions on the two power wires. say wire A is in plug 1 and wire B is in plug 2. final position should be A in 2 and B in 1. that should take care of it. good luck
×