I just got a 2004 tiburon 6 speed 4 cyl why is it when i shift when pressing on the gas the rmps go up but dont pick up speed ??? help

chang trann fuild and filter

"Car won't go in reverse" - New Tiburon Forum : Hyundai Tiburon ...

www.newtiburon.com/forums/.../189049-car-won-t-go-reverse.html

Aug 8, 2010 - 23 posts - ‎16 authors
Okay guys I just sold my 03 tiburon GT 6 speed to a 16 year old. I just got a ... Join Date: Sep 2006. Location: ... "It stalls and just drift forward, no reverse lights" Now did he break somethng or is he putting it in 6th..... Any Ideas. ... To view links or images in signatures your post count must be 5 or greater. Location of reverse light switch? - New Tiburon Forum ...
8 posts
Jul 23, 2014
So who's reverse lights don't work? - New Tiburon ...
25 posts
Apr 11, 2009
More results from www.newtiburon.com
Missing: hatchback

2003 Hyundai Tiburon Manual Transmission Complaints

www.aboutautomobile.com/.../Hyundai/Tiburon/Manual+Transmission

My 2003 hyundai tiburon clutch and flywheel broke on 3 separate occasions since ...into reverse, I had a hard time finding it, it would not let me put it into reverse and I ....2006; Description of the Complaint: I have 2003 v6 tiburon, clutch failed at ... bought 2004 5 speed tiburon (she bought it before my problems started) and ...

Transmission Won't Shift/CEL Due to Failed Speed Sensors ...

repairpal.com > Problems > Hyundai > Sonata

Hello you have a internal transmission problem you will need to have your car hoisted up and transmission further asset a transmission specialist or dealer ship is the best solution this is a big job unless you have allot of previous experience this is my best solution for you.

You don't provide much information to go on (type of vehicle, type of engine, 2wd or 4wd, etc.) RPM is always going to be based on the speed you're traveling with a standard transmission. My 4 cyl 5 speed Nissan pickup in 5th gear runs at 3000 RPM at about 75mph.

get a scan tool to retrieve the dtc (diagnostic trouble code).
you will get a misfire code.
p0301 for cyl 1
p0302 for cyl 2 and so on.
i can't recall if that engine has plug wires or coil on plug but if its coil on plug replace the coil corresponding to the cylinder misfire

2001 OLDSMOBILE ALERO 3.4L 6-cyl Engine Code [E]
2001 OLDSMOBILE ALERO 2.4L 4-cyl Engine Code [T]

Automatic Transmission,4T45-E......AF6
Automatic Transmission,4T40-E......AF6
Use Low Viscosity ATF, Hight Viscosity ATF or additives create fluid retention which cause the servos, solenoids to seize up causing shifting problems.

CAPACITIES:
Automatic Transmission, 4T45-E Initial Fill..........6.5 liters
Automatic Transmission, 4T40-E Initial Fill..........6.5 liters
Automatic Transmission, Total Fill
4 speed 4T45-E..........12.2 liters
4 speed 4T40-E..........12.2 liters

Good luck and hope this helps.

If v6 may need to remove intake manifold and applicable parts to gain acess to spark plug coils, remove coils and remove plugs install reverse order
If 4 cyl remaove cover on valve cover remove spark plug coils etc.

having the same problem... my car is an 03 as well... any solution yet? i flushed my tranny, put in synthetic, made sure the linkages were lubricated inside and outside the car, and still nothing.. theres no grinding, at all, its just really gummy

check that clutch again

is it a gas or a diesel? its commen for the gas motor to get really crappy millage try with the tow button off and the shifting should improve, but the gas try changing the air filter to a k&N or something better like it