How do I reset the imoblizer on 2001 cx70

I bought a 2000 Jetta that someone poped the ignition switch out. The imoblizer prevented the theaft. I guess the dealer wanted $800+ to repair and reprogram. I had the imoblizer deleted from the Ecu. Only $50. I'm sure they can put them back also. But then you will have to get your stuff programed. Look on line for imoblizer delete

Replaced your starter

If the lights work but no crank, it could be the security system or the neutral safety switch among other things.
Is the security light on or flashing ? Do the warning lights come on when you turn the key on ? Did you try cranking it in neutral ?

the imbolizer is in the Ecu it self

i had that problem and it was the pass-lock system...to reset the code i had to turn the ignition to right before it cranked for 10mins turn it off for 6sec (not removing the key) and repeat that two more times and it cranked like a champ, had to do it a few more times with in the month but it eventually stopped.

its likely to be the car imoblizer still on reset the car alarm and look for bad conections around the battery box

This is normal because when you unlock to car with the remote it disables the imoblizer so that you can start your car.

Cheers,

Toon.

very seldom to

try putting it on a battry charger over night . when boosting the newer jimmy and car you need to make sure you have a very good constion . they will full you sometime and look at your fueses insde and out ok have a good day

the theft light flickering leads me to believe that your problem is with the vehicals imoblizer system