I need the specific diagram for the serpentine belt diagram
SOURCE: need routing diagram for 2000 lincoln town car serpentine belt
There's a diagram at this link.
SOURCE: Installing serpentine belt for 2000 Lincoln Continental
Item
Part Number
Description
1
10300
Generator
2
8509
Water Pump Pulley
3
8678
Belt Idler Pulley
4
6B209
Drive Belt Tensioner
5
3A674
Power Steering Pump
6
8620
Drive Belt
7
19703
A/C Compressor
8
6312
Crankshaft Pulley
SOURCE: exploded diagram 95 lincoln town car 4.6l
If your talking about the heater pipe and hose under the intake....(to ease removal you can remove the inlet air cowl/wipers/etc.) remove upper intake/coils/fuel line etc. the tube is bolted to the back of the RT head...replace the entire tube/hose assemble....IF the tube at the frt of the block is corroded/damaged/etc. you will need to replace that also (remove waterpump for access and installation)...change you T/Stat at this time also....hope this helped you...GL
SOURCE: Need Diagram for 2003 Lincoln Aviator Serpentine Belt
There are 2 possible diagrams depending on if you have a 4.6L SOHC or a 4.6L DOHC. This information should be on the plate under the hood. Best of luck!
Greg
4.6L SOHC
4.6L DOHC
SOURCE: i need a diagram to replace serpentine belt on a
My sincere apologies for the delayed response.
I am personally going back to answer - unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks!
http://www.2carpros.com/car_repair_information/year/1998/make/lincoln/model/continental/1998_lincoln_continental_drive_belt_routing_diagram.htm
2,360 views
Usually answered in minutes!
×