What all do i need to fix
SOURCE: 98 ford taurus starts, runs, dies
change the coolant temp sensor and rest the codes then try
cleam the MAF by brake and parts cleaner
i hope its help thanx
SOURCE: 4 codes P0171,P0174,P2195,P2197
Hi
171 system too lean
174 system too lean
2195 - 02 ozygen sensor signal stuck lean Bank1 Sensor 1
2197- 02 ozygen sensor signal stuck lean Bank 2
Sensor 1
The 2 front 02 sensors are located on the front of
the exhaust manifold.
Should solve problem and increase gas mileage.
SOURCE: my 98 taurus has this codes what do i need to fix? p1518.p0174.p0
p0171 and p0174 are o2 sensors, There are 4 o2 sensors on a Taurus. 1 on each exhaust manifold, and 1 after each catalytic converter.
p1518 is vehicle speed, idle speed control----this means the idle air control needs fixed. you can take it off and clean carbon from it. do not push on end of air valve it will loose its adjustment. do not put in any liquid to clean, the best way is to clean end of valve with an old toothbrush or similar. also clean carbon from engine side where iac mounts. when clean put back on. you can use carb cleaner for end of valve, as for the 02 sensors, you have to find out which ones are bad first. or replace all thats up[ to you. you have to get a 02 sensor socket for 3/8 drive. then they just turn out. the best way to get them out is have the car warm.
SOURCE: Got code P2195, P2197, P0171, P0174??
Regards,
Tony
777 views
Usually answered in minutes!
×