- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
code p2138 refers to--throttle position sensor/switch D/E voltage correlation causes ---wiring--TP sensor/switch I would check that the switch is connected properly or I would replace the throttle position sensor/switch.
P2440 refers to the Secondary Air Injection system. It means that the switching valve is stuck open. We already replaced the secondary air flow pump, now it's telling us that's its the secondary air flow sensor and the valve is stuck open. the code is coming up P2440
P2430 Secondary Air Injection System Air Flow/Pressure Sensor Circuit, The AIR diagnostic uses 3 phases to test the AIR system:
DTCs P0411 and P2430 run during Phase 1 DTCs P2430 and P2440 run during Phase 2 DTC P2444 runs during Phase 3 During phase 2, only the AIR pump is activated. The solenoid valve is closed, this is p2430 and p2440. -The AIR system pressure sensor is stuck. good-day !!
There is a GM service bulletin on this particular item. basically covers both codes your getting. #07-06-04-019A: Intermittent MIL/SES, DTC P2138 with Reduced Engine
Power (Repair Instrument Panel (IP) to Body Harness Connector)
×