Why do the brakes lock up 1997 Honda accord SRS

SOURCE: SRS light stays on on 1997 Honda Accord.

That means there is a problem with your airbags.  Take both cables off of the battery for 10 minutes or so and reconnect it.  This should reset your computer.  If the light continues to stay on, code it.  If you don't have a code reader, then take it in and have someone code it.  This will tell you what is exactly wrong with the airbags.  It could be something simple or something complex.

SOURCE: My 1997 Honda Accord EX power door lock makes a loud grinding sou

replace the pass side door lock actuator

SOURCE: 2002 Honda Accord. SRS LIGHT CAME ON

Open the door of both sides (driver and passenger) and look for the panel for the fuses. Remove the panel and you will see the fuse box. The information of the fuses is on the panel.

SOURCE: 1996 HONDA ACCORD FRONT BRAKE LOCK UP AFTER

check that the master cylinder is not locking on with a pressure build up the cyl may need replacing probly does

Jeremy

• 268 Answers
• Posted on Oct 03, 2009

SOURCE: Tool needed to remove SRS Control Module fro 1997 Honda Accord

Hi, the bit is called a Torx Bit or a star bit. Don't get the type for a screwdriver, get the socket that would go on a ratchet, you'll need to put an extension on it of course to get in there. Push hard or it will strip. Give Honda a call and ask them what size it is for your car for sure, might be a 6mm or you can just buy a metric Torx Bit Set. Separately they are $3.99 at Autozone. Not sure how much the kit is. Good luck.