How to remove the starter on a 2000 daewood laganza 2.2 leter

there is just one long rib belt does all drive pulleys on that engine..it obviously has to be fed around pulleys the right way..

Pull the radio out. On top of the radio there is a 4 digit number that's how you unlock it..

Thanks Wiky

you need to replace the window regulator there not made to repair

I guess you tried reversing the kill switch. But did you try it after you put the ignition on? Some switches work this way. Try different things. ignition on, ignition off, etc

hi,
it is under the upper timing belt cover between the camshaft gears. According to the manual touching anything related to timing belt requires removing million parts including right front wheel. I suspect this might be an overkill just to remove upper timing belt cover.

So my advice would be to get it done by some mechanic as u will not be able to do it and may damage other parts also.

Thanks!
Sandy

when you open your hood and you look on the valve cover you see on your left side of top of your cover a cable sticking out from a black piece that is the positioning sensor that cranksup the car

You are more likely right to think you have done some damage to the cylinder head. If you have no compression on number 2 & 3 cylinders then I would take the head off and inspect and recondition the head. You may also have damaged the pistons or rings. Anyway with out looking for any damaged parts, you will not find what parts you will need. I would get a workshop manual for the vehicle to help you. Also if you decide to rebuild the engine, fit a new timing belt.

valves bent sorry for the bads news

How is the timing belt, these are famous for premature failure of the timing belt, they should be changed at 60,000

have you plenty of fuel pressure ,take hose off and test pressure